Table of Contents
Advertisement
Using the menu (Continued)
The display setting menu
Use this menu to set screen display-related items.
Item
Screen size
Full
4:3
Full : This mode is best for squeeze-signal video images.
4:3 : This mode is best for 4:3-signal video images on the 4:3-size screen.
Zoom : This mode is best for video images of letter-box or cinema signals.
Language
Select one of the languages below to use for displaying the menu and messages
[
: Enter setting mode]
English/Français/Deutsch/Italiano/Español/Português/
Svenska/Türkçe/
Background
Screen to display when there is no input signal
(Logo)
Icon
Display icons as function guides
Start-up screen
Display start-up screen when power is turned on On
Screen size
The screen size of this unit is 16:9, but the screen size can be changed according to
the input signal.
Note
• Using these functions to change the picture size (i.e., changing the height/width
ratio) for any purpose other than your private viewing may be prohibited under the
Copyright Laws of the United States and other countries, and may subject you to
civil and criminal liability.
Input signal
4:3 signal
Full
Squeeze signal
Full (O)
Letter box signal
Full
Cinema signal
Full
Notes
• The screen size cannot be changed when the 16:9 signal is input.
• You cannot select "Zoom" when the input is COMPUTER or DVI.
Description
Zoom
[
:Selection]
[Apply:
]
/
/
/
(Blue)
(Black)
On
Off
Off
Projection screen
4:3 signal
Zoom
4:3
Zoom
4:3
Zoom (O)
4:3
Zoom (O)
(O): Optimum screen size
30
English
Français
The default setting menu
This menu shows placement status and other settings.
Item
Projection
Sets projection mode in accordance with Placement Style.
mode
No signal
Set the timer to wait for the power to be turned off after signal input stops.
power off
Press
Off (not turned off)/1 min./5 min./10 min./30 min./60 min.
Auto input
Set whether the input with signals is only selected or not.
/
search
Power on
Sets whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the power cord is plugged in (Auto). Manual
Lamp power
[Note 1]
Sets the lamp power.
Fan mode
[Note 2]
Sets the cooling fan speed.
Reset all
Press
Resets all adjustments and settings to their factory settings.
Notes
1: When Lamp power is set to Low, the screen becomes a little darker, but the cooling fan noise gets
quieter.
2: Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to use the projector,
for example, at high altitude (over 1,500 meters above sea level).
Notes
• Note that in the event of a power outage but the power is restored afterwards, the projector
power will come on if Power on is set to Auto.
• When you turn off the projector even if Power on is set to Auto, you must press the ON/
STANDBY button to turn the power off.
Español
Deutsch
Italiano
Description
(Mounted
(Standard)
(Rear)
from ceiling)
. Switch with
and
.
.
31
Português Svenska
p.19
(Rear mounted
from ceiling)
On
Off
Auto
Low
Standard
Standard
High
Yes
No
Advertisement
Table of Contents
