Panasonic AJ-PX270 Settings Manual page 6

6. Configure TVU Receiver
Please consult TVU networks support about TVU Receiver configuration for
pairing between Panasonic camera/recorder and TVU Receiver.
http://www.tvunetworks.com/support/
TVU Support can also create a custom nickname for the camera
A P2 icon will appear on the TVU Receiver GUI once pairing is complete.
NOTE: P2 devices do not provide an index picture to the TVU GUI.
TVU Receiver configuration should be modified to receive Panasonic streaming.
This should be remotely done by TVU Support.
To start a live transmission, simply select the P2 device in the source list and press
the LIVE button. The stream will begin within a few seconds.
To stop a live transmission, press the STOP button
Please note, the TVU bitrate, latency (delay) and VBR/CBR functions do not affect
P2 transmission.
[ 5/6 ]