Front Panel - Philips CCZ196AT Owner's Manual

CCZ196comb.QX33 4/6/99 7:04 PM

22 Front Panel

POWER Button
Press to turn the power on or off. When
you press the POWER button to turn on the
TV/VCR, the remote locator will be activat-
ed. Details are on page 28.
Cassette Compartment
Insert a video cassette tape here.
Wireless Remote Sensor
Receives a signal from your remote control
so you can operate the TV/VCR from a dis-
tance.
STOP/EJECT Button
Press once to stop the tape. When playback
is stopped, press to eject the tape. Press to
select an item in the pop up menu.
REW(ind) Button
When tape playback is stopped, press to
rewind the tape at high speed. During play-
back, press to rewind the tape while the pic-
ture stays on-screen. Press to change a set-
ting of a pop up menu item (for example, to
adjust the BRIGHTNESS setting).
PLAY Button
Press to play a tape. Details are on page 31.
Press to release Slow, Search or Still mode
and return to normal playback. Details are on
page 54. Press to select an item in the pop up
menu.
F.FWD Button
When tape playback is stopped, press to fast
forward the tape at high speed. During play-
back, press to fast forward the tape while the
picture stays on-screen. Press to change a
setting of a pop up menu item (for example,
to adjust the BRIGHTNESS setting).
REC(ord)/OTR Button
Press once to start a recording. Details are on
page 32. Press repeatedly to start a One-
Touch Recording (an immediate timed
recording, 30 minutes to eight hours long) of
the channel you are watching. Details are on
page 33.
REC(ord) Light
Appears during a recording. It flashes when the
TV/VCR power is turned off to set a timer recording
or when a recording is paused. It flashes rapidly if the
TV/VCR is turned off to set a timer recording and
there is not a tape in the TV/VCR.
Page 22
STOP/EJECT REW PLAY F.FWD REC/OTR CHANNEL VOLUME POWER
h e a d
MTS
MULTI TV STEREO
VOLUME o/p
Buttons
Press to adjust the
sound level.
Press the CHANNEL
o button and the
VOLUME p button
on the TV/VCR at
the same time to
display the pop up
menu. Press again to
remove the menu.
CHANNEL o/p
Buttons
Press to scan through
the TV/VCR channels.
During tape playback,
press to adjust the
tracking. Details are
on page 53.
Press the CHANNEL
o button and the
VOLUME p button
on the TV/VCR at
the same time to
display the pop up
menu. Press again to
remove the menu.