Table of Contents
Advertisement
4. Installing your video recorder
Preparation for use
This chapter shows you how to prepare the video
recorder for use. The video recorder automatically
seeks out and stores all available TV channels.
'Aim' correctly
In the following sections, you require the remote
control for the first time. When using, always
aim the front of the remote control at the video
recorder and not at the TV.
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
1.
1.
Press with
.
P+
The automatic TV channel search starts.
PLEASE WAIT
START
The video recorder does not find any TV
channels during the search
• Select channel 1 on the TV. Can you see the
saved TV channel on the TV?
If not, check the cable connection of the aerial
(aerial socket), video recorder, TV.
• The video recorder searches the entire frequen-
cy range in order to find and save the largest
possible number of TV channels. It is possible
that the TV channels in your country are broad-
cast in a higher frequency range. As soon as
this range is reached during the search, the
video recorder will find the TV channels.
2.
2.
The clock setting display appears on the TV
screen.
TIME --:--
DATE --/--/--
END=EXIT
3.
3.
Set the time with the number buttons
4.
4.
Set 'DAY', 'MONTH' and 'YEAR' with the
number buttons
0..9
5.
5.
When all information is correct, save by
pressing
STATUS/EXIT
The preparation for use is now complete.
FINISH
.
0..9
.
.
Manual TV channel search
In some cases it can occur that all of the TV
channels are not found and saved during the first
installation. In this case, the missing or coded TV
channels must be searched for and stored man-
ually.
1.
1.
Switch on the TV. If required, select the pro-
gramme number for the video recorder.
2.
2.
Press
.The main menu will appear.
MENU
3.
3.
Use
or
PLAY B-K
SET UP'. Then press
4.
4.
Use
or
PLAY B-K
AL TUNING'. Then press
MANUAL TUNING
PROG.
CHANNEL
SKIP
SELECT K L CHOOSE B
END=EXIT
5.
5.
Select 'PROG.' with
Then press
FWD 1- B
6.
6.
With
or
PLAY B-K
the desired programme number that you want
to use for the TV channel, e.g. 'P01'. Then
press
FWD 1- B
7.
7.
Select 'CHANNEL' with
and confirm with
desired channel with
If you set ' SKIP ' on for a channel, this chan-
nel will be ignored when going through the
P +
channels with
I don't know the channels for my TV stations
In this case, press
'CHANNEL' to start the automatic channel
search. A changing channel number will appear
on the TV screen. Continue the automatic search
until you have found the desired TV channel.
8.
8.
Save the TV channel with
9.
9.
To search for other TV channels, begin again
at step 5.
10.
10.
To end, press
6
to select 'TUNER
STOP C-L
.
FWD 1- B
to select 'MANU-
STOP C-L
.
FWD 1- B
P55
055
[OFF]
or
PLAY B-K
STOP C-L
.
, select
or
0..9
STOP C-L
.
or
PLAY B-K
STOP C-L
. Then enter the
FWD
1- B
0..9
.
or
P–
.
or
PLAY B-K
STOP C-L
.
FWD 1- B
.
STATUS/EXIT
.
,
in
EN
Advertisement
Table of Contents
