System Controller Leds - Cisco NCS 5500 Series Hardware Installation Manual

System Controller LEDs

LED
LC
PM
FT
PWR MGMT

System Controller LEDs

The system controller module LEDs are located on the left side of the module.
Hardware Installation Guide for Cisco NCS 5500 Series Modular Routers
130
Color Status
Green Line cards are all operational.
Amber Check the
Off No line cards are present, or all present line cards are in the shutdown
configuration state.
Power supplies are all operational.
Green
Amber Check the
Green Fan trays are all operational.
Amber Check the
Sufficient power is available for all of the installed modules.
Green
Amber Either of the following conditions:
• Insufficient power for at least one of the installed modules.
• The configured power redundancy mode differs from the
operational power redundancy.
Line Card LEDs for more information.
Power Supply LEDs for more information.
Fan Tray LEDs for more information.
LEDs