Operating The System - Philips FW-P75/34 User Manual

CONTROLS
∞ DYNAMIC BASS BOOST (DBB)
– to select a bass boost level or to
switch off bass boost.
§ OPEN
– to open tape deck 2.
≥ TAPE DECK 2
• TAPE DECK 1
ª OPEN
– to open tape deck 1.
º REPEAT
– to repeat a CD track, a disc, or all
available discs.
⁄ MUTE
– to switch off the sound temporarily.
¤ BALANCE L/R
– to balance the sound level of the Front
Left and Right speakers.
‹ CENTER +/-
– to adjust the sound level of the center
speaker.
› REAR +/-
– to adjust the sound level of the
surround speakers.
fi TEST TONE
– to check the sound level of the Front
Left, Front Right, Center and Surround
speakers.
fl SHUFFLE
– to play all the available discs and their
tracks in random order.
12
pg 01-31/P75-P78/34-Eng 12
‡ SLEEP TIMER
– to switch the system to standby mode
at a selected time.
° B
– to switch the system to standby mode.
Notes for remote control:
– First select the source you wish to
control by pressing one of the
source select keys on the remote
control (e.g. CD, TUNER, etc.).
– Then select the desired function
( É , í , ë , etc.).

OPERATING THE SYSTEM

MINI HIFI SYSTEM
PROGRAM
REPEAT TIMER REC
NEWS T.A. AM MW FM LW
60Hz 250Hz
500Hz 1KHz
STANDBY
ON
CLOCK/
TIMER C D 1 • 2 • 3 BAND
CD TUNER
PROG
SEARCH • TUNING STOP • CLEAR PLAY PAUSE
SOUND NAVIGATION
DIGITAL SOUND
CONTROL
Important:
Before you operate the system,
complete the preparation procedures.
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the
system. When the system is switched
on for the first time, the demonstration
mode will start automatically.
Notes:
– During the demonstration, if you press
any source (or standby-on) button, the
system will switch to the respective
mode (or standby).
– When the system is switched to standby
mode, the demonstration will resume 5
seconds later.
2/22/00, 7:29 PM
C
STEREO
L R
BACK
FRONT
HSD
PRO LOGIC
4KHz 8KHz
2KHz
S S
RDS
NEWS/TA
NEWS!
TAPE 1 • 2 CDR / VIDEO
TAPE AUX
A.REV
SIDE A•B PRESET
PREV SIDE NEXT
MIC
LEVEL
DYNAMIC BASS
MIC
BOOST
To stop the demonstration mode
• Press and hold Ç (on the system only)
for 5 seconds when the system is in
demonstration mode.
™ The demonstration will stop.
™ "DEMO OFF" is displayed.
™ The system will switch to standby
mode.
™ (for model FW-P78 only)
About five seconds later, the system
will go into an energy saving mode
( < 2 watts ). The low power
STANDBY ON LED will be lit.
Notes:
– When the system is switched on from
the main power outlet, the CD carousel
tray may open and close again to
initialize the set.
3139 116 19561