Switching the system on
In standby/demonstration mode
Press STANDBY ON to switch on the last
selected source.
Press CD, TUNER, TAPE (TAPE 1/2) or
AUX.
Press OPEN•CLOSE.
The system will switch to CD mode.
In Eco Power standby mode
Press ECO POWER to switch on the last
selected source.
Press CD, TUNER, TAPE 1/2 or AUX on the
remote control.
Switching the system to standby
mode
In demonstration mode
Press and hold Ç on the system.
In any other source mode (except Eco
Power standby mode)
Press STANDBY ON (or B on the remote
control).
The clock will appear on the display when the
system is in standby mode.
Switching the system to Eco
Power standby mode (< 1 Watt)
Press ECO POWER (or press and hold B on
the remote control).
"ECO PWR" is displayed, then the display
screen will go blank.
The low power ECO POWER LED will be
lighted.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power standby or standby mode.
pg 001-028/C399/21-Eng
Dim mode
You can select the desired brightness for the
display.
In any source mode (except Eco Power standby
or standby mode), press DIM MODE
repeatedly to select DIM 1, DIM 2, DIM 3 or
DIM OFF display mode.
DIM
Volume control
Adjust VOLUME to increase (turn knob
clockwise or press VOLUME +) or decrease
(turn knob anti-clockwise or press VOLUME -)
the sound level.
To listen through the headphones
Connect the headphones plug to
the n socket at the front of the
system.
The speakers will be muted.
13
Basic Functions
is shown, except for DIM OFF mode.
Spectrum
DIM
Brightness
mode
Analyser
1
normal
off
2
half
on
3
half
off
OFF
normal
on
3139 115 21121
4/16/02, 4:55 PM
13