Table of Contents
Advertisement
Installation
Remark: When the system configuration is altered, the system monitor needs to check
and memorize the configuration of the cameras and accessories connected to its inputs.
This is done automatically when the power is switched on. Use the power switch to
switch off. Operating the power save key is not sufficient.
If switching off is impracticable, use the auto install option of the system monitor's
install menu.
Mounting the box
1
Loosen the screw holding the cover and remove the cover.
2
Remove the circuit board
3
Fasten the bottom plate of the box with two screws.
CL 66610005_501.AI
.
CL 66610005_502.AI
CL 66610005_504.AI
6
Advertisement
Table of Contents
