Set Up Sdv5222T; For Vhf Reception; For Uhf Reception; Set Up A Digital Tuner With This Antenna - Philips SDV5222T/27 User Manual

4 Set up SDV5222T

For VHF reception

1
Extend the VHF rod antenna to the
longest possible length.
2
Turn the TV to the desired channel/
station. Move the VHF rod antenna in
different directions until the reception is
achieved.

For UHF reception

Turn the TV to the desired channel/station.
Note
•
To check the distance from the local TV broadcast
transmitters to your location, visit www.antennaweb.
org for more information.
EN
8
Set up a digital tuner with this
antenna
You can install available channels with the digital
TV tuner. This automatic process is part of the
setup of the tuner. Ensure the antenna has
set up properly before the tuner can receive
viewable channels.
There are two ways to connect the antenna to
the TV:
• Connect the antenna to a digital tuner.
If the signal strength is good enough, the
channels can be memorized in the tuner
automatically .
• Connect the antenna directly to the TV.
Tune to the analogue channels and find the
best antenna location. Then re-connect
the antenna to the digital tuner. Ensure the
signal strength is good enough before you
install the channels with the tuner.