NEC Express5800/E120d-1 User Manual page 69

Chapter 2 Preparations
6. Remove the SAS/SATA cable from SATA
connector of Motherboard.
7. Connect SAS/SATA cable to RAID
Controller.
7-1. When four or less hard disk drives are installed:
Connect SAS/SATA cable removed in Step 6 to connector (Ports 0-3) on RAID Controller.
7-2. When five or more hard disk drives are installed:
Connect SAS/SATA cable removed in Step 8 to connector (Ports 0-3) on RAID Controller.
Connect K410-269(00) Intaernal SAS/SATA cable of an option to connector (Ports 4-7) on RAID
Controller.
8. Connect the PCI riser card to the
motherboard slot and fix the card with the
screw.
When connecting the card, position the
terminal part of the PCI riser card to the
slot on the motherboard and insert it.
Express5800/E120d-1 User's Guide
1. Installing Internal Optional Devices
69