Fujitsu PRIMERGY LTO3 User Manual page 72

• Do not use a data cartridge that has had a strong shock such as being dropped or falling.
CAUTION
For details of a leader pin, refer to "3.2.4 Checking the Condition of the Leader Pin on the Data
Cartridge" ( pg.73).
3.2.1 Setting the Data Cartridge Label
A label to be attached to the data cartridge is provided with the data cartridge. Attach the label at the
location shown in the following figure. Write the starting date of the data cartridge use to specify the
expiration date.
Be sure to use the provided label.
Do not attach the label to a place other than the specified place.
3.2.2 Data Write Protection
To make the data cartridge write-protected, slide the write-protect switch to the right.
Write-protect switch
72
• Do not use a defective media whose leader pin is detached, whose data cartridge
is deformed, or which had a shock, because such defective media can damage
the drive.
Area for the label to be attached
Starting date: Jan 1 2006
<Example of the label>
Write-protect