Makita 5201N-A Instruction Manual page 6

11. When operating the saw, keep the cord away from the cutting area and position it so
that it will not be caught on the work piece during the cutting operation.
Operate with proper hand support, proper work support, and supply cord routing
away from the work area. Large panels must be supported as shown below.
12. Never attempt to saw with the circular
saw held upside down in a vise. This can
lead to serious accidents, because it is
extremely dangerous.
13. Before setting the tool down after completing a cut, be sure that the lower (telescop-
SAVE THESE INSTRUCTIONS.
ing) guard has closed and the blade has come to a complete stop.
6