Table of Contents
Advertisement
5.7.4.1 How to activate baby call mode
Press
to access the main menu
1
Press
/
to select ADVANCED SET
2
Press
and
3
CALL
Press
to select BABY MODE
4
Press
and
5
Press
to save the settings
6
•
The message BABYCALL ON will display
on the idle screen.
5.7.4.2 How to deactivate baby call mode
Press and hold
1
has been activated before).
Press
/
to select OFF
2
Press
to save the settings
3
•
The message BABYCALL ON will
disappear on the idle screen.
5.7.4.3 How to change baby call number
Press
to access the main menu
1
Press
/
to select ADVANCED SET
2
Press
and
3
CALL
Press
and
4
BABYCALL NR.
Press
to enter the number
5
Press
to save the settings
6
5.7.5
How to manually select a base
station
One CD445 handset can register up to four
different CD445 base stations.
Press
to access the main menu
1
Scroll
/
to select ADVANCED SET
2
Press
and
3
SELECT
Press
and
4
desired base station
Press
to confirm
5
24
/
to select BABY
/
to select ON
(when Baby Call mode
/
to select BABY
/
to select
/
to select BASE
/
to select your
5.7.6
How to register an additional
handset
The procedures described below are the
procedures that you will find in your handset.
The procedures may vary according to the
handset you want to register. In this case, please
refer to the manufacturer of the additional
handset.
Additional handsets must be registered to a
base station before you can use them. Up to 5
handsets can be registered to one base station.
The Master PIN is required before you can
register or unregister handsets.
Press
on the handset to access the main
1
menu
Scroll
/
to select ADVANCED SET
2
Press
and
3
REGISTRATION
Press
and
4
desired base station
Note
The registered base station is marked with an
asterisk at the rightmost of the display.
Press
and enter the 4-digit master PIN
5
when prompted (default master PIN is
0000)
Press
on the base station for more
6
than three seconds until you hear a beep
tone. Now the base station is ready to
register the new handset
Press
on the handset to validate the
7
PIN code
WAITING -- is displayed on the screen
8
•
A beep tone is emitted from the handset to
indicate successful registration and the screen
returns to idle mode.
Note
If the base is found and the PIN is correct, the
unused handset numbers will be assigned
automatically.
If the PIN is incorrect, WRONG PIN! will be
displayed with an error tone, and the handset
returns to idle mode.
If no base is found within a certain period, NO
BASE will be displayed with an error tone, and
the handset returns to idle mode.
/
to select
/
to select your
Use more of your phone
Advertisement
Table of Contents
