EN
You will need to register your handset if it shows UNREGISTERED in the display or if you wish to register
the handset to a different base unit. You can register up to 4 handsets on a single base, and you can register a
handset to 4 bases.
To register your handset :
1.
Press
If your handset displays UNREGISTERED, go to step 5.
2.
Select ADVANCED SET and press
3.
Select REGISTRATION and press
4.
Before you enter the PIN code, press and hold the PAGING key
base is now in the registration mode. (If the base is full and cannot take on any more handset, you will not
be able to register. See "Un-registering a handset", page 26 to delete a currently registered handset.)
5.
Enter the PIN code (default: 0000) and press
6.
Select a base station using the digit keys 1, 2 , 3 or 4. A blinking digit indicates that the base number is
already used.
If the registration failed, follow the procedure and try again.
10
Registering your handset
.
Using the menus
From standby, press
Use UP/DOWN
Press Softkey
Press Softkey
level.
.
.
.
to enter the menu.
to go up or down in the menu list.
to confirm the selection.
to exit the menu or to go back to the previous menu
on the base for 4 seconds. The