Shaving With Mini Shaver Attachment; Hair Clipping; Clipping With Hair Comb Attachment - Philips Norelco G370/65 User Manual

Shaving With Mini Shaver
Attachment
1 Put the mini shaver attachment on the
groomer (fig. 18).
2 Use the narrow mini shaver to shave
along contoured edges to remove any
stubble while creating a smooth, well-
defined beard line.
Before using the mini shaver, always check it for
wear and damage. If the mini shaver shows signs of
wear or damage, do not use it as injury may occur.
Do not use the mini shaver until it has been
replaced.
Gently press the mini shaver onto the skin.
Do not press too hard.

Hair Clipping

◗
Make sure that the appliance is fully charged
before you start clipping hair. The appliance
will not operate while cord is connected to
electrical outlet.
◗
Before you start clipping, make sure that the
head of the person whose hair you are cutting
is at the same level as your chest so that all
parts of his/her head are clearly visible and
within easy reach.
◗
Only use the appliance on dry hair.
◗
Do not use on freshly washed hair.
◗
Before you begin, comb the hair in the direction
of growth.
◗
To achieve optimal clipping results, always move
the appliance slowly through the hair against
the direction of hair growth.

Clipping with hair comb attachment

1 Put the hair clipper comb on the full width
trimmer attachment and push until you hear
it 'click' into place (fig. 19).
2 Press the Hair Length Selector and slide it to
the desired setting. See Table 2.