3: Eeprom Initialization; 4: Waste Ink Counter Clear - Canon JX500 Service Manual

5-8-4 3: EEPROM initialization

The EEPROM value is initialized. The waste ink counter is not initialized.

5-8-5 4: Waste Ink Counter Clear

Clear the waste ink counter when replacing the waste ink sheet.
Waste Ink Counter Clear Procedure
1. Set the MFP service mode standby.
(Refer to Part1: 5-4 User Maintenance
2. Press [ Stop] ] key 4 times. Select the waste ink counter clear item. Press [ON/OFF] key.
(Refer to Part1: 5-5 How to Enter in MFP Service
MFP Service Mode)
3. Select the counter clear item according to the number of pressing [ Stop] key.
NUMBER OF
PRESSING
[ STOP] KEY
0
1
2
3 or more
Mode)
COUNTER CLEAR ITEM
Set the main waste ink counter to 0%.
Set the platen waste ink counter to 0%.
Set the main & platen waste ink counter to 0%.
Return to MFP service mode standby.
Part 1 - 49
Mode, Part1: 5-6 Selective Function in
[ON/OFF] LED
STATUS
ON
OFF
ON
OFF