Table of Contents
Advertisement
2 - Safety
Safety Prescriptions
4 | © 2019 ABB | DOC. N° 1SDH002109A1001 - ECN000125349 - Rev. A
HARZARD! ELECTRIC SHORK RISK! In the case of persons who are not authorized to
with local legislation, in order to avoid any potential electrical risk during assembly,
installation, maintenance or removal of the E-Hub 2.0 from service, disconnect or
lock out all electrical supplies.
WARNING!
•
Detailed descriptions of the standard installation, use and maintenance procedures
and principles for operating in safety are not included: it is important to note that
this document contains safety and caution indications against certain methods (of
installation, use and maintenance) that could harm persons, damage devices or make
them less safe.
•
These warnings and alarms do not encompass all conceivable installation, use and
maintenance methods recommended or not recommended by ABB that could be applied
and possible consequences and complications of each conceivable method. Neither will
ABB investigate all these methods.
•
Anybody who used maintenance procedures or devices, recommended by ABB or not
has to check thoroughly that neither personal safety nor safety devices are placed in
danger by the installation method, use, maintenance or by the instruments used; for
further information, explanations or specific problems contact the nearest ABB.
•
This manual has been written only for qualified persons and is not to be intended as
substitute for a suitable course or experience with the safety procedures for this device.
•
For products provided with communication, the purchaser, the installer or the final
customer are responsible for applying all the IT security measures to prevent risks arising
from the connection to communications networks; these risks comprise amongst other
things the use of the product by unauthorized persons, the alterations of its normal
operation, access to and modification of information.
•
The purchaser, the installer or the final customer and person responsible for ensuring
that safety warnings and notices are displayed and also that all the access points and
operating devices are safely locked when the switchgear is left unattended.
•
All the information contained in this document is based on the latest information
available at the moment of publication. We reserve the right to modify the document at
any moment without prior notice.
work on pants carrying live voltage in accordance
ABB | E-Hub 2.0
Introduction | Safety
Advertisement
Table of Contents
