Philips BDL5545E/00 User Manual page 3

Read and follow these instructions when connecting and using your display:
Unplug the display if you are not going to use it for an extensive period of time.
z
Unplug the display if you need to clean it with a slightly damp cloth. The screen many be wiped
z
with a dry cloth when the power is off. However, never use alcohol, solvents or
ammonia-based liquids.
Consult a service technician if the display does not operate normally when you have followed the
z
instructions in this manual.
The casing cover should be opened only by qualified service personnel.
z
Keep the display out of direct sunlight and away from stoves or any other heat source.
z
Remove any object that could fall into the vents or prevent proper cooling of the display's
z
electronics.
Do not block the ventilation holes on the cabinet.
z
Keep the display dry. To avoid electric shock, do not expose it to rain or excessive moisture.
z
If turning off the display by detaching power cable or DC power cord, wait for 6 seconds before
z
attach the power cable or DC power cord for normal operation.
To avoid the risk of shock or permanent damage to the set do not expose the display to rain or
z
excessive moisture.
When positioning the display, make sure the power plug and outlet are easily accessible.
z
IMPORTANT: Always activate a screen saver program during your application. If a still, high
z
contrast image remains on the screen for an extended period of time, it may leave an
'after-image' or 'ghost image' on the front of the screen. This is a well-known phenomenon that
is caused by the shortcomings inherent in the LCD technology. In most cases the afterimage
will disappear gradually over a period of time after the power has been switched off. Be aware
that after-image cannot be repaired and is not covered under warranty.
2
User Manual BDL5545E