Select Shock-Protect Setting; Reset; Additional Information; Detach The Front Panel - Philips CEM200/55 User Manual

Select shock-protect setting

You can select the shock protection setting,
depending on the stability of your car and the
condition of the road.
1
Press MENU/DISP for 3 seconds.
2
Press or repeatedly until [ESP] is
displayed.
3
Turn to select a setting:
[ESP 10 S]: select this when the road
is smooth and there are few bumps.
[ESP 40 S]: select this when the road
is bumpy and unstable.

Reset

You can reset the unit to its default setting.
1
Detach the front panel (see 'Detach the
front panel' on page 19).
2
Press the reset button by using a ball-
point pen or a similar tool.
»
Preset adjustments such as preset
channels and sound adjustments are
erased.
8 Additional
information

Detach the front panel

You can detach the front panel to deter theft.
1
Press to release the panel.
2
Press the left side of the panel rightward.
3
Pull the panel towards you to detach it
from the chassis.
4
Store the panel in the supplied carry case
to protect it from dirt or damage.
EN 19