Table of Contents
Advertisement
Cassette Recorder
Recording your voice
(Cassette B only)
1 Select TAPE source.
2 Follows steps 3-4 under Recording from
the Radio.
3 Speak towards the built-in microphone
MIC located on the top panel.
•
Your voice is recorded.
4 Follows steps 5-6 under Recording from
the Radio.
Helpful hints:
–
When recording, speaking a little far toward the
MIC on the top panel to avoid distortion of
recorded sound.
–
When recording, volume adjusting will not affect
the volume of the recorded sound. The recorded
sound volume can be auto adjusted.
Recording Cassette A to Cassette B
1 Select TAPE source.
2 Insert a tape to be recorded in the Cassette
A.
•
If desired, select a particular point of tape A to
start recording.
3 Insert a blank tape in the Cassette B.
4 Push DUBBING/BEAT CUT on the top
panel to NORMAL or HIGH position.
NORMAL: Recording speed is the same as
the Cassette A playback.
HIGH: Recording speed is about 2 times the
Cassette A playback.
5 Press PAUSE ; on the Cassette B.
6 Press REC 0.
•
Cassette B is in standby for recording.
7 Press PLAY 1 on the Cassette A.
PAUSE ; auto ejects, and recording starts.
•
To stop recording,
Simultaneously press 9// on the Cassette A
•
and Cassette B.
•
Recording will auto stop when Tape B
comes to the end earlier.
• When Tape A comes to the end earlier,
immediately press 9// on the Cassette B to
stop recording.
Note:
– When recording, do not switch
DUBBING/BEAT CUT to change recording
speed.
The making of unauthorized copies of
copy-protected material, including com-
puter programmes, files, broadcasts and
sound recordings, may be an infringe-
ment of copyrights and constitute a
criminal offence.This equipment should
not be used for such purposes.
Advertisement
Table of Contents
