Before Operating; To Set The Clock; Stop/Clear - Sharp R-2120J Cooking Manual

• Before operating your new microwave oven make
sure you read and understand this operation manual
completely.
• Before the oven can be used, follow these proce-
dures:
1. Plug in the oven. Close the door. The oven display will
show_l Jou_II 0uE_Y I _1CLE,_'_ II R'YD I
__.
2. Touch the Stop/Clear pad. _ will appear.
3. Set clock.
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
ll:IIl_li Jlll:l I IJ] L llll_l't
I Timer I
L 'nc '
1 Clock ,u_,c, I
Touch Timer/Clock pad [ CLOC_ff I
OOCCC
and number [_.
[,,,L . ...2 I
z P-lP-IDP-1 J
Enter the correct time of
Lr/_E ]
day by touching the
numbers in sequence.
-_ I Timer I 2:3,'_7 J
_'_ I Clock I
Touch Timer/Clock pad again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time, _will appear in the display.
Touch the Stop/Clear pad and re-enter the time.
If the electrical power supply to your microwave
oven should be interrupted, the display will intermit-
tently show after the power is reinstated. If this oc-
curs during cooking, the program will be erased. The
time of day will also be erased. Simply touch Stop/
Clear pad and reset the clock for the correct time of
day.
NOTE: Your oven can be programmed with the door
open except for START/Minute Plus and Popcorn.
STOP/CLEAR
Touch the Stop/Clear pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
2O