Switch To Standby - Philips DC220/37 User Manual

2
Open the iPod / iPhone.
Time and date information on the iPod / iPhone transfers to
»
the unit automatically.
To set time and date manually:
1
In standby mode, press and hold DATE • AUTO TUNE / TIME
SET for 2 seconds.
[12 HR] begins to blink.
»
2
Press TUNING +/- or
3
Press DATE • AUTO TUNE / TIME SET to confi rm.
The hour digits begin to blink.
»
4
Press TUNING +/- or
5
Press DATE • AUTO TUNE / TIME SET to confi rm.
The minute digits begin to blink.
»
6
Repeat steps 4-5 to set the minute, year, month, and day.
Turn on
1
Press POWER .
The unit switches to the last selected source.
»

Switch to standby

1
Press POWER again to switch the unit to standby mode.
The time and date (if set) appear on the display panel.
»
/ to select 12/24 hour format.
/ to set the hour.