Communicating with the ICU Controller
When the unit is used as wireless controller
When performing adjustment with this unit, first establish communication
with the JTC-C200 ICU controller.
The method of making communication varies depending on the remote
control system: wireless or wired.
MENU button
v/V/B/b button
• Connect the cellular phone to the unit.
• Make sure that the phone number for the modem connected to the ICU
controller has been registered.
For connecting the cellular phone, see page 14. For registering the phone
number, see page 17.
1
Turn on the power of the cellular phone.
2
Set the POWER switch on the unit to ON.
The title display appears in the display window after about 9 seconds,
and the unit automatically starts dialing.
J U M B O T R O N
M A I N T E N A N C E E Q U I P M E N T
J M E - S A 2 0 0
When communication is established, the MAIN MENU appears in the
display window.
* * * * * * M A I N M E N U * * * * * *
S W I T C H E R C O N T R O L
S I G N A L C O N T R O L
G E O M E T R Y C O N T R O L
M O N I T O R C O N T R O L
S C R E E N C O N T R O L
S C R E E N U N I T C O N T R O L
O T H E R C O N T R O L
ENTER button
POWER switch
(continued)
21
Before Adjustment
Adjustment