Related Manuals for Fujitsu PB-91469G-LS-256BGA
Summary of Contents for Fujitsu PB-91469G-LS-256BGA
- Page 1 Fujitsu Microelectronics Europe FMEMCU-UG-910022-13 User Guide MB91V460 FAMILY PROBE CABLE PB-91469G-LS-256BGA USER GUIDE...
-
Page 2: Revision History
V1.1 Recycling Note added 2007-Apr-11 V1.2 Hli, remove MCU before using probe info added 2008-Sep-16 V1.3 MSc, China-RoHS regulation added This document contains 27 pages and the schematic in the middle. UG-910022-13 - 2 - © Fujitsu Microelectronics Europe GmbH... -
Page 3: Warranty And Disclaimer
Warranty and Disclaimer To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the PB-91469G-LS-256BGA Probe and all its deliverables (e.g. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in... -
Page 4: Table Of Contents
CSICE256Y2027FJ01 Top view ................... 21 CSICE256Y2027FJ01 Bottom view ................21 5 DIMENSIONS......................... 22 PB-91469G-LS-256BGA ....................22 YQSOCKET256SE......................23 6 INFORMATION IN THE WWW..................24 7 CHINA-ROHS REGULATION ..................25 8 RECYCLING ........................27 UG-910022-13 - 4 - © Fujitsu Microelectronics Europe GmbH... -
Page 5: Overview
PB-91469G-LS-256BGA V12 Chapter 1 Overview 1 Overview 1.1 Abstract The PB-91469G-LS-256BGA is a probe cable with Level shifters to support the MB91V460 external bus interface at 3.3 V levels. This fix/flex cable can be connected between the BGA-660P ADAPTER MB2198-300) and the starter kit (SK-91469G-256BGA), or the own target application. -
Page 6: Default Jumper Setting
P03_4 D4 / use LV4 > JP10 is closed Jumper 2pol open JP42 P03_5 D5 / use LV4 > JP11 is closed Jumper 2pol open P03_6 D6 / use LV4 > JP12 is closed JP43 Jumper 2pol open UG-910022-13 - 6 - © Fujitsu Microelectronics Europe GmbH... - Page 7 1–2, 4-5 E/F5/6 JP90 DEOP0 2x3pol 1–2, 4-5 E/F9 DREQ0 JP91 2x3pol 2-3, 5-6 G5/6 JP92 DEOTX0 2x3pol 2-3, 5-6 F/G5/6 JP93 DACKX1 2x3pol 1–2, 4-5 F/G9 DEOP1 JP94 2x3pol 1–2, 4-5 © Fujitsu Microelectronics Europe GmbH - 7 - UG-910022-13...
- Page 8 JP100 VDD35 jumper 1x3pol 1 – 2 C/D10 JP101 3V supply jumper 1x3+1 1 – 2 C/D10 JP102 5V_T > UVCC5 Jumper 2pol closed JP103 3V3 > UVCC3 Jumper 2pol closed UG-910022-13 - 8 - © Fujitsu Microelectronics Europe GmbH...
- Page 9 PB-91469G-LS-256BGA V12 © Fujitsu Microelectronics Europe GmbH - 9 - UG-910022-13...
-
Page 10: Jumpers
1DIR connected to DIR -> the direction of LV1/1 JP1 (D0-D7) 1 – 2 1A<>1B is selectable direction control 1DIR connected to GND -> LV1/1 direction B/A 2 – 3 LV1 /1DIR (MB2198-300 to target) UG-910022-13 - 10 - © Fujitsu Microelectronics Europe GmbH... - Page 11 2DIR connected to 5V > LV5/2 direction A/B > JP61 (A24-A27, (target to MB2198-300) MONCLK) direction control 2 - 3 2DIR connected to GND -> LV5/2 direction B/A LV5 2DIR (MB2198-300 to target) © Fujitsu Microelectronics Europe GmbH - 11 - UG-910022-13...
-
Page 12: Data Bus
JP6 (D1) Direction control via DIR (D0-D7 in all) OFF (open) ON (closed) P03_2 D2 > JP38 must be open JP8 (D2) Direction control via DIR (D0-D7 in all) OFF (open) UG-910022-13 - 12 - © Fujitsu Microelectronics Europe GmbH... - Page 13 > Direction control via DIR (D0-D7 in all) OFF (open) ON (closed) P03_3 D3 > in case of close JP39, JP9 must be JP39 (D3) open. > Direction control via DIR (D0-D7 in all) OFF (open) © Fujitsu Microelectronics Europe GmbH - 13 - UG-910022-13...
-
Page 14: Chip Select: Jp66 - Jp81
CSX7 in all) ON (closed) P09_2 CSX2 / > in case of close JP68, JP76 must JP68 (CSX2) be open. > Direction control via JP64 (CSX0 – OFF (open) CSX7 in all) UG-910022-13 - 14 - © Fujitsu Microelectronics Europe GmbH... - Page 15 CSX7 in all) ON (closed) P09_7 CSX7 / > in case of close JP81, JP73 must JP81 (CSX7) be open. > Direction control via JP87 (CSX0 – OFF (open) CSX7 in all) © Fujitsu Microelectronics Europe GmbH - 15 - UG-910022-13...
-
Page 16: Dma Signals: Dack, Deop, Dreq, Deotx And Iowrx, Iordx
5 – 6 1DREQ1 > V460_DREQ1 1 – 2 V460_DREQ1 > 2DREQ1 JP95 (DREQ1) 2 – 3 4DREQ1 > MCU_E2 DMA Request 4 – 5 MCU_E2 > 5DREQ1 5 – 6 UG-910022-13 - 16 - © Fujitsu Microelectronics Europe GmbH... -
Page 17: Jp98)
5 – 6 1IORDX > V460_IORDX 1 – 2 JP98 (IORDX) V460_IORDX > 2IORDX 2 – 3 DMA control signal 4IORDX > MCU_F3 4 – 5 MCU_F3 > 5IORDX 5 – 6 © Fujitsu Microelectronics Europe GmbH - 17 - UG-910022-13... -
Page 18: External Bus Signals: (Rdy, Asx, Bgrntx, Brq, Wex, Baax)
> Direction control via JP32 ON (closed) BAAX P10_2: Output pin for external bus burst JP53 (BAAX) access. > JP40 must be open > Direction control OFF (open) via JP62 UG-910022-13 - 18 - © Fujitsu Microelectronics Europe GmbH... -
Page 19: Other Jumpers: Mclke (Jp14), Rdy (Jp17), Vcc3C (Jp24), Wex (Jp45), Monclk (Jp55), Rdy Or Wex (Jp60), Avcc5 (Jp82), Avss (Jp83/84), Avrh5 (Jp85)
Analog input voltage is disconnected from the (AVSS) OFF (open) target Analog reference voltage is connected to the target ON (closed) JP85 (AVRH5) Analog reference voltage is disconnected from the OFF (open) target © Fujitsu Microelectronics Europe GmbH - 19 - UG-910022-13... -
Page 20: Installation
CSICE256Y2027FJ01 into YQSOCKET256SE. - Remove MCU out of the socket (CS-PACK) before using the probe cable f: PB-91469G-LS-256BGA g: YQSOCKET256SE h: CSICE256Y2027FJ01 i: CSPACK256 k: Target board (e.g. SK-91469G-256BGA) UG-910022-13 - 20 - © Fujitsu Microelectronics Europe GmbH... -
Page 21: Csice256Y2027Fj01 Top View
PB-91469G-LS-256BGA V12 Chapter 4 Installation CSICE256Y2027FJ01 Top view CSICE256Y2027FJ01 Bottom view © Fujitsu Microelectronics Europe GmbH - 21 - UG-910022-13... -
Page 22: Dimensions
PB-91469G-LS-256BGA V12 Chapter 5 Dimensions 5 Dimensions PB-91469G-LS-256BGA UG-910022-13 - 22 - © Fujitsu Microelectronics Europe GmbH... -
Page 23: Yqsocket256Se
PB-91469G-LS-256BGA V12 Chapter 5 Dimensions YQSOCKET256SE © Fujitsu Microelectronics Europe GmbH - 23 - UG-910022-13... -
Page 24: Information In The Www
PB-91469G-LS-256BGA V12 Chapter 6 Information in the WWW 6 Information in the WWW Information about FUJITSU MICROELECTRONICS Products can be found on the following Internet pages: Microcontrollers (8-, 16- and 32bit), Graphics Controllers Datasheets and Hardware Manuals, Support Tools (Hard- and Software) http://www.fme.gsdc.de/gsdc.htm... -
Page 25: China-Rohs Regulation
“Year”. © Fujitsu Microelectronics Europe GmbH - 25 - UG-910022-13... - Page 26 X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. • Data listed in the table represents best information available at the time of publication UG-910022-13 - 26 - © Fujitsu Microelectronics Europe GmbH...
-
Page 27: Recycling
According to the European WEEE-Directive and its implementation into national laws we take this device back. For disposal please send the device to the following address: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a 63225 Langen © Fujitsu Microelectronics Europe GmbH - 27 - UG-910022-13...