Preparations; Before Using The Remote Control; Replacing Battery (Lithium Cr2025) Into The Remote Control; Placing The Power Box - Philips MZ-1100/37 Owner's Manual

Preparations

Before using the remote control

1
Pull out the plastic protective sheet.
2
Select the source you wish to control by pressing
one of the source select keys on the remote
control (for example MP3-CD, TUNER).
3
Then select the desired function (for example
É Å , S, T).
Replacing battery (lithium
CR2025) into the remote control
1
Pull out the knob A slightly to the left.
2
Pull out the battery compartment B.
3
Replace a new battery and fully insert the
battery compartment back to the original
position.
CAUTION!
Batteries contain chemical substances,
so they should be disposed off properly.

Placing the power box

Place the power box as close as possible to the
power supply.
Do not place this unit in closed spaces, cover it
or block the air vents.
Do not insert or drop anything into this unit
through the air vents as this could cause serious
damage.
10
plastic
protective
sheet
A
B