Aux; Aux (Listening To An External Source) - Philips MCM239D/12 User Manual

USB
1
Check the USB device has been properly
connected. (See Installation: Connecting an
additional appliance)
2
Press SOURCE once or more to select USB
(or USB on the remote control)
➜
The icon appears
– NO AUDIO appears if no audio file is found in
the USB device
3
Play the USB's audio files as you do with the
albums/tracks on a CD (See CD)
Note:
– For compatibility reasons, the album/track
information may differ from what it is displayed
through flash players' music management software.
– File names or ID3 tags will be displayed as ---
if they are not in English.
INFORMATION REGARDING USB DIRECT:
Compatibility of the USB connection on this
product:
●
This product supports most USB Mass
storage devices (MSD) that are compliant to
the USB MSD standards.
– Most common Mass storage class devices
are flash drives, memory sticks, jump drives
and etc.
– If you see a "Disc Drive" show up on your
computer after you plugged the mass
storage device into your computer, most
likely it is MSD compliant and it will work
with this product.
●
If your Mass storage device required a
battery/power source. Please make sure you
have a fresh battery in it or charge the USB
device first and then plug it into the product
again.
Supported Music type:
●
This device only supports unprotected music
with the following file extension:
.mp3
.wma
●
Music bought from on-line music stores are
not supported because they are secured by
Digital Rights Management protection (DRM).
●
File name extensions that end with the
following are not supported:
.wav; .m4a; .m4p; mp4; .aac and etc.
No Direct connection can be made from Computer
USB port to the product even you have either or
both mp3 or wma files in your computer.
AUX (Listening to an external
source)
You can listen to the sound of the connected
external device through your MCM239D.
1
Check the external device has been properly
connected (See Installation, Connecting an
additional appliance)
2
Press SOURCE once or more to select AUX
(or AUX on the remote control)
3
To avoid noise distortion, turn down the volume
on your external device
4
Press the PLAY key on the connected device to
start playback
5
To adjust the sound and volume, use the sound
controls on your external device and the
MCM239D.

AUX

23