Advertisement
Setup
Setup
Setting the clock
1
Press and hold STANDBY-ON (or y on the remote control ) to switch the set to
Standby mode.
➜ The display shows the set time.
➜ -- --:-- -- flashes by default if you have not set the clock.
2
In the standby mode, press and hold DISPLAY/CLOCK on the remote control.
➜ 24 HR or 12 HR appears for the initial clock setting. To select 12-hour clock or
24-hour clock,
1. Press VOLUME +/- once or more.
2. Press DISPLAY/CLOCK to confirm.
➜ The hours digits start flashing.
3
Hold down or press VOLUME +/- repeatedly to set the hours.
4
Press DISPLAY/CLOCK to confirm.
5
Hold down or press VOLUME +/- repeatedly to set the minutes.
6
Press DISPLAY/CLOCK to confirm.
Enjoy
Playing discs
With this system, you can play all pre-recorded audio CDs (CDDA), all finalized audio CD-Rs
and CD-RWs, MP3/WMA-CDs (CD-Rs/CD-RWs with MP3/WMA files).
1
Press SOURCE once or more to select CD (or CD on the remote control).
2
Press DOOR OPEN to open the CD compartment.
3
Insert a disc with the printed side facing outwards. Then close the CD door.
4
Press ÉÅ to start playback.
5
To stop playback, press STOPÇ.
IMPORTANT!
– Remove the
protective plastic tab
before using the
remote control.
Notes for remote control:
– First, select the source you wish to
control by pressing one of the source
select keys on the remote control (CD or
TUNER, for example).
– Then select the desired function
( 2;, 4 , ¢ for example).
Advertisement
