Get Started; Connect Speakers; Connect Fm Antenna - Philips MCM302/12 User Manual

Philips micro hi-fi system mcm302
Hide thumbs Also See for MCM302/12:
Table of Contents

Advertisement

3 Get started

Caution
Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in
sequence.
If you contact Philips, you will be asked for
the model and serial number of your unit. The
model number and serial number are on the
bottom of your unit. Write the numbers here:
Model No. __________________________
Serial No. ___________________________

Connect speakers

Note
Ensure that the colors of the speaker wires and
terminals are matched.
For optimal sound, use the supplied speakers only.
Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specifi cations section of this manual.
1
Hold down the socket fl ap.
2
Insert the stripped part of the wire
completely.
Insert the right speaker wires to "
left speaker wires to " L".
Insert the red wires to "
to " -".
3
Release the socket fl ap.
12
EN
R",
+", black wires
a
b

Connect FM antenna

Tip
For optimal reception, fully extend and adjust the
position of the antenna.
For better FM stereo reception, connect an outdoor
FM antenna to the FM AERIAL jack.
The unit does not support MW radio reception.
1
Connect the supplied FM antenna to the
FM AERIAL jack on the main unit.
c

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mcm302

Table of Contents