Table of Contents
Advertisement
Access Modular
Controller
Notice!
If the AMC2-4R4 is set to RS-232 mode, set jumper JP1 (= A2).
4.6.2
Grounding for Extension Interface
Figure 4.6: Location of ground jumper bottom side
Jumper B connects the internal ground of the AMC2-4R4 to the
RS-485 ground of the slave interface. Only set jumper B (B2) if
the AMC2-4R4 powers all other peripheral devices directly
connected to it.
Bosch Sicherheitssysteme GmbH
Installing | en
27
2013-08 | AMC2-4R4 |
Advertisement
Table of Contents
