Other Features; Set The Sleep Timer; Set The Alarm Timer; Listen To An External Device - Philips DC5070/10 User Manual

8 Other features

Set the sleep timer

This docking system can switch to standby
automatically after a set period of time.
1
When the unit is turned on, press SLEEP/
TIMER repeatedly to select a set period
of time (in minutes).
When sleep timer is activated,
displayed.
To deactivate sleep timer
1
Press SLEEP/TIMER repeatedly until
[SLEEP OFF] (sleep off) is displayed.
When sleep timer is deactivated,
disappears.

Set the alarm timer

This docking system can be used as an alarm
clock. You can select iPod/iPhone/iPad, FM
TUNER, or USB as alarm source.
Note
• Ensure that you have set the clock correctly.
1
In standby mode, press and hold SLEEP/
TIMER until [SET TIMER] (set timer)
scrolls on the display.
2
Press USB, DOCK, or TUNER to select
a source.
3
Press SLEEP/TIMER to confirm.
The hour digits are displayed and begin
to blink.
4
Press / to set the hour, and then
press SLEEP/TIMER again.
The minute digits are displayed and
begin to blink.
5
Press / to set the minute.
6
Press SLEEP/TIMER to confirm.
The alarm timer is set and activated.
16 EN
Activate and deactivate the alarm
timer
In standby mode, press SLEEP/TIMER
repeatedly to activate or deactivate the alarm
timer.
If the alarm timer is activated,
displayed
If the alarm timer is deactivated,
disappears.
is
Note
•
If USB/iPod/iPhone/iPad source is selected, but
no USB/iPod/iPhone/iPad is connected, the FM
TUNER is selected automatically.

Listen to an external device

You can also listen to an external audio device
through this docking system.
1
Press AUX to select AUX source.
2
Connect the supplied MP3 link cable to:
• the
• the headphone jack on the device
3
Start to play the device. (See the device
user manual).
AUX jack on the back of the unit
is