3. Installation
3.3 Rear connections
Warning:
– Never make or change the connections
when the mains is switched on.
3.3.1 Connecting antennas
1
Extend the wire antenna and fit it to the FM
ANTENNA as shown below
2
(Optional) To improve FM reception, fit the plug
of the wire antenna into the plug of the
extension line (sold separately) as shown below
3
Extend the extension line and move it in
different positions for optimal reception (as far
away as possible from the TV,VCR or other
radiation sources)
4
Fix end of the extension line to the ceiling
3.3.2 Connecting a USB mass storage
device
On Station, you can playback music from a USB
mass storage device.
1
Insert the USB device's USB plug into the socket
on the Station
16
For the devices with USB cable:
●
Insert one plug of the USB cable (not supplied)
to the socket
●
Insert the other end of the USB cable into the
USB output terminal of the USB device
3
To playback music from the USB device, press
SOURCE once or more times to select USB
source (see 8. External source)
Helpful hints:
The Station only supports USB devices that adhere
to the following standards:
– USB MSC ( Type '0' )
– File system in FAT12/ FAT16/ FAT32
– Operations based on simple folder based
navigation (also known as a normal FAT file
system), and not based on proprietary track
database.
The following USB devices will not be supported by
the Station:
– MTP based or Dual mode (adhering to both the
MSC and MTP standards) devices, as the
Station does not support browse, play and
export functions using the MTP protocol.
– Products with database based UI (Artists,
Albums and Genre based navigation) as these
products normally store music files in a specific
hidden folder and uses embedded proprietary
track database that the Station is unable to
read properly.
on the Station