Adjust Settings; General Setup; Audio Setup - Philips MCD785 User Manual

Table of Contents

Advertisement

8 Adjust settings

1
Press SYSTEM MENU.
2
Select a setup page.
3
Select an option and then press .
4
Select a setting and then press OK.
• To return to the previous menu, press
.
• To exit the menu, press SYSTEM
MENU.

General setup

On the [General Setup] (General Setup) page,
you can set the following options:
[Disc Lock] (Disc Lock)
Set play restriction for specific discs. Before you
start, place the disc in the disc compartment.
[Lock] (Lock) – Restrict access to the
current disc. You need to enter a password
to unlock and play the disc.
[Unlock] (Unlock) – Play all discs.
Tip
To set or change the password, go to [Preference
Setup] (Preference Setup) > [Password] (Password).
[Display Dim] (Display Dim)
Change the brightness level of the display panel
on this unit.
[100%] – Normal brightness.
[70%] – Medium brightness.
[40%] – Dimmest display.
[OSD language] (OSD language)
Select the preferred language for on-screen
display.
[Screen Saver] (Screen Saver)
The screen saver protects the TV screen
damage due to prolonged exposure to a static
image.
[On] (On) – Enable the screen saver.
[Off] (Off) – Disable the screen saver.
[Sleep Timer] (Sleep Timer)
Switches to standby automatically after the
preset time.
[15 mins] (15 mins), [30 mins] (30 mins),
[45 mins] (45 mins), [60 mins] (60 mins),
[90 mins] (90 mins), [120 mins] (120
mins)– select the count down time before
the apparatus switches to standby.
[Off] (Off) – disable sleep mode.
[DivX
VOD Code] (DivX
®
Display the DivX
registration code.
®
Tip
Enter this DivX registration code when you rent or
purchase video from www.divx.com/vod. The DivX
videos rented or purchased through the DivX
(Video On Demand) service can be played only on the
device to which it is registered.

Audio setup

On the [Audio Setup] (Audio Setup) page, you
can set the following options:
[HDMI Audio] (HDMI Audio)
When you connect this apparatus and TV with
an HDMI cable, select the audio output setting
for this connection.
[On] (On) – the sound is output through
both your TV and this apparatus. If the
audio format on the disc is not supported,
it is downmixed to two-channel sound
(Linear-PCM).
[Off] (Off) – disable audio output from the
TV. The sound is only output through this
apparatus.
[Audio Sync] (Audio Sync)
When you play a video disc, set the default
delay time for audio output.
VOD Code)
®
VOD
®
EN
21

Advertisement

Table of Contents
loading

Table of Contents