Preparation; General Notes; Connecting To A Tv - Philips DVD711/05 User Manual

Preparation

DIGITAL AUDIO OUT
PCM/MPEG2/AC3/DTS
MAINS
OPT OUT DIG OUT
14 PREPARATION
TV
D C B
A
I
AUX/VCR
IN
STEREO OUT
II
TV OUT
R L (CVBS) (Y/C)
AUDIO OUT VIDEO OUT S-VIDEO OUT

General notes

- Depending on your TV and other equipment you wish to connect, there
are various ways you could connect the player. Possible connections are
shown in the following drawings.
- Please refer to the manuals of your TV, VCR, Stereo System or other
devices as necessary to make the best connections.
- Do not connect your DVD-player via your VCR. The video quality could be
distorted by the copy protection system.
- For better sound reproduction, connect the player's audio out jacks to the
audio in jacks of your amplifier, receiver, stereo or A/V equipment. See
'Connecting to optional equipment'.
Caution: Do not connect the player's audio out jack to the phono
in jack of your audio system.

Connecting to a TV

Connect the SCART to the corresponding connector on the TV using the
SCART cable supplied (A).
If your TV is not equipped with a SCART you can select one of the following
alternative connections:
S-Video (Y/C) connection
1
Connect the S-Video jack on the DVD-player to the S-Video in jack on
the TV using an optional S-Video cable (B).
2
Connect the audio Left and Right out jacks to the audio left/right in jacks
on the TV (D).
Video CVBS connection
1
Connect the Video out (CVBS) jack to the video in jack on the TV using
the video cable supplied (C).
2
Connect the audio Left and Right out jacks to the audio left/right in jacks
on the TV (D).