Table of Contents
Advertisement
Unpacking
First check and identify the contents of your SACD player
package, as listed below:
– SACD player
– AC power cord
– Remote Control with batteries
– Audio cable
– CVBS Video cable
– SCART cable
– Instructions for use
If any item is damaged or missing, please inform your
supplier immediately.
Save the packaging materials; you may need them to
transport your player in future.
Placement
/
¶ Place the player on a firm, flat surface.
¶ Keep the player away from domestic heating equipment
and direct sunlight.
¶ In a cabinet, allow about 2.5 cm (1 inch) of free space all
around the player for adequate ventilation.
¶ If the SACD player cannot read SACDs/CDs/DVDs/VCDs
correctly, use a commonly available cleaning CD/DVD to
clean the lens before taking the SACD player to be
repaired. Other cleaning methods may destroy the lens.
Always keep the tray closed to avoid dust on the lens.
¶ When it is moved from a cold to a warm environment,
allow the SACD player to acclimatize for at least 2 hours in
order to avoid damage. When suddenly placed in a warm
environment, the lens may cloud over. Playing an SACD/
CD/DVD will not be possible then. Wait until moisture
evaporates.
I
8
NTRODUCTION
Infrared remote control
Loading the batteries
1
Open the battery compartment cover.
2
Insert two 'AA' (LR-6) batteries as indicated inside the
battery compartment.
3
Close the cover.
Caution: Do not mix old and new batteries. Also
never mix different types of batteries (standard,
alkaline, etc.).
+
-
+
-
Advertisement
Table of Contents
