Cisco CATALYST 5002 Quick Installation Manual page 6

3
Connect the Switch to the Network (continued)
RJ-21 Telco
To connect to modules with RJ-21 Telco interfaces, use
Category 3 UTP cable with male RJ-21 Telco
connectors.
SC-Type Fiber Optic
To connect to modules with SC-type fiber-optic interfaces,
6
use single-mode or multimode fiber-optic cable with male
SC-type connectors.
ST-Type Fiber Optic
To connect to modules with ST-type fiber-optic
interfaces, use single-mode (FDDI) or multimode
(10BaseFL) fiber-optic cable with male ST-type
connectors.