Step 4: Setting The Tv; Selecting The Matching Colour System - Philips HTS3110/12 User Manual

If the language you want is not
available in the list, select { Others }.
Use the numeric keypad (0-9) on the
remote control to enter the 4-digit
language code 'XXXX' (see last page) and
press OK to confi rm.
E
Repeat steps C ~ D
Helpful Hints:
– During DVD playback, you can switch the
audio and subtitle languages by pressing the
AUDIO and SUBTITLE buttons on the
remote control. However, this does not
change the default settings you have made
here.
– For some DVDs, the subtitle/audio/menu
language can only be changed via the DVD
disc menu.
TIPS: The underlined option is the factory default setting.
Press to go back to the previous menu item. Press SETUP to exit the menu.
Getting Started
for other settings.

Step 4: Setting the TV

Selecting the matching colour
system
The colour system of the DVD system,
DVD and TV should match. Only then
will it be possible to play a DVD on this
system. Before changing the TV system,
determine the colour system of your TV.
A
In 'DISC' mode, press SETUP on the
remote control.
B
Press repeatedly to select { Video
Setup Page }.
C
Press to highlight { TV Type }, then
press .
Video Setup Page
TV Type
TV Display
Picture Setting
{ PAL }
Select this if the connected TV has the
PAL colour system. It will change the
video signal of an NTSC disc and output
it to PAL format.
{ NTSC }
Select this if the connected TV has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{ Multi }
Select this if the connected TV is
compatible with both NTSC and PAL
(multi-system). The output format will
be in accordance with the video signal of
the disc.
(continued)
PAL
NTSC
Multi
19