Sync Audio Output With Video Play - Philips HTS3568W/93 Quick Start Manual

Sync audio output with video play

If the video play is slower than the audio output
(sound does not match with the pictures), you
can delay the audio output to match the video.
1
Press and hold AUDIO SYNC until
'AUDIO SYNC XXX' is displayed.
• 'XXX' denotes the delay time.
2
Within fi ve seconds, press VOL +- to
set the delay time for audio output.
Note
•
If the volume control is not used within 5 seconds, it
resumes normal volume control function.
Quick skip play to a specifi c time
1
During playback, press INFO.
The disc status menu is displayed.
2
Select the current elapsed playing time in
the menu, then press OK.
• [ TT Time ] (title time)
• [ CH Time ] (chapter time)
• [ Disc Time ] (disc time)
• [ Track Time ] (track time)
3
Press the number buttons to change the
time where you want to skip to, then press
OK.
Set repeat play for a specifi c section
1
During playback, press INFO.
The disc status menu is displayed.
2
Select [ Repeat ] in the menu, then press
B.
3
Move to [ A-B ] in the menu, then
press OK to set the starting point.
4
Press OK again to set the ending point.
Repeat play starts.
5
To cancel repeat play, select [ Repeat
Off ] and press OK.
Note
•
The marked section for repeat play is only possible
within a track/title.
View DVD play from different camera
angles
1
During playback, press INFO.
The disc status menu is displayed.
2
Select [ Angle ] in the menu, then press
OK.
3
Press the number buttons to select an
angle, then press OK.
Note
•
Only applicable to discs contain sequences recorded
from different camera angles.
EN 27