Care And Cleaning - Breville DuraCeramic Manual

care and cleaning

Unplug and switch off your waffle maker and allow it to fully cool down before
cleaning it. Never immerse the main body, cord set or plug in water or liquid of any
kind.
Never use steel wool, scouring pads, abrasive cleaners or metallic utensils to clean
your waffle maker.
1. Wipe the waffle plates with absorbent paper or a soft damp cloth.
2. Clean the outside of your waffle maker with a soft damp cloth. The cover can be
polished with a soft dry cloth.
3. Remove one plate at a time. Press the corresponding release button and lift the plate
away from the heating element.
4. Immerse the plates in warm, soapy water. Rinse with clean water. Wipe dry with a
soft cloth.
Note: We recommend that you wash the plates by hand only, in order to preserve the
DuraCeramic coating.
™
5. Replace one plate at a time. Guide the positioning tabs into the slots located on
the hinge side of the waffle maker. Press the plate gently to lock in place onto the
heating element.
Note: The bottom plate is slightly shallower than the top plate. Each plate will only fit
into the appropriate position on the waffle maker (bottom or top).
Storage
1. Allow the waffle maker to cool fully before storing and ensure that the appliance is
clean.
2. Lock the waffle plates together by clipping the latch shut. Wrap the cord in the cord
storage area.
3. Store the appliance upright. Alternatively, on a flat, level surface, away from the edge
and where it cannot be easily knocked over.
8