Table of Contents
Advertisement
Connect video cables
This section describes how to connect this
DVD Home Theatre unit to your TV so to
enable viewing of disc play.
Select the best video connection that your TV
can support.
•
Option 1: Connect to HDMI socket (for a
HDMI, DVI or HDCP-compliant TV).
•
Option 2: Connect to component video
socket (for a standard TV or Progressive
Scan TV).
•
Option 3: Connect to video (CVBS) socket
(for a standard TV).
Note
•
You must connect this unit directly to a TV.
EN
12
Before you connect
1
Push up the catches at the bottom of the
rear cover and lift it up.
2
Connect the cables to the corresponding
sockets and direct the cables to the
CABLE OUT point.
3
Once complete, close the rear cover.
Note
•
All the cables must be placed properly inside the rear
panel in order for the rear cover to close.
Advertisement
Table of Contents
