AEG PROSOURCE Installation And User Manual page 37

Step Action
Install the tap.
3
– Install the tap (B) according to the instructions supplied with the
tap (see image 6).
4 Optional: install the filter.
– If you need a filter, install the filter (E) according to the instructions
supplied with the filter (see image 7).
– When you install the flow meter, mount the flow meter (42) to the
filter according to the instructions supplied with the filter.
5 Attach the t-piece.
– Attach the t-piece (14) to the cold water supply and place the seal
(13) in between (see image 8).
Mount the pressure safety valve.
6
If you install the solo configuration:
– Attach the pressure safety valve (C) to the bracket (15) with the tie
wrap (24) according to the instructions supplied with the pressure
safety valve.
– Place the pressure safety valve (C) with the discharge connection
(20) on the siphon (see image 9).
– Mount the bracket (15) with the four screws (25) to the wall of the
kitchen cabinet (see image 10).
If you install the combi configuration:
– Mount the pressure safety valve (C) to the mixing valve (D) and
place the adapter (19) and seal (32) in between (see image 11).
– Attach the pressure safety valve (C) to the bracket (15) with the tie
wrap (24) according to the instructions supplied with the pressure
safety valve.
– Place the pressure safety valve (C) with the discharge connection
(20) on the siphon (see image 12).
– Mount the bracket (15) with the four screws (25) to kitchen cabinet
wall (see image 10).
Attach the discharge connection.
7
– Attach the discharge connection (20) to the siphon using the screw
funnel (21) (see image 13).
ENGLISH 35