Manual Store; Other Settings In The Install Menu - Philips 37PF7320/10 User Manual

2440.2 gb 05-10-2005

Manual Store

This menu is used to store the programmes
one at a time.
&
Press the
MENU
é
With the cursor, select the
Manual store .
TV Menu
Picture
Sound
Features
Install
" : select Europe (automatic detection*)
System
or Western Europe (BG standard), Eastern
Europe (DK standard), United Kingdom
(I standard) or France (LL' standard).
* Except for France (LL' standard), you must select
choice France.

Other settings in the Install menu

&
Press the
MENU
menu.
é
Language : to change the display language for
the menus.
" : to select your country (
Country
Britain).
This setting is used for the search, automatic
programme sort and teletext display. If your country
does not appear in the list, select ". . . "
'
Auto Store : to start automatic search for all
programmes available in your region. If the
transmitter or cable network sends the
automatic sort signal, the programmes will be
numbered correctly. If this is not the case, you
need to use the Sort menu to renumber the
programmes (see p. 5).
Some transmitters or cable networks broadcast
their own sort parameters (region, language, etc.). In
this case, indicate your choice using the keys oœ
and validate with π. To quit or interrupt the search,
press the
MENU
If no picture is found, consult Tips, p. 14.
6
10:15 Pagina 6
key.
Install menu then
Manual Store
System Europe
Search
Program No.
Fine Tune
Store
key and select the
Install
for Great
GB
key.
: press π.The search starts. Once a
'
Search
programme is found, the scanning stops and its
name is displayed (when available). Go to the
next step. If you know the frequency of the
required programme, this can be entered
directly using the digit keys.
If no picture is found, consult Tips, p. 14.
( : enter the required number with
Program No.
the keys pπ or with the digit keys.
§
: if the reception is not satisfactory,
Fine Tune
adjust using the keys pπ.
: press π.The programme is stored.
è
Store
! Repeat steps ' to è
store.
ç To quit the menus, press the i key.
(
: If required, you can give a name to the
Name
programmes and external connectors. Use the
keys oœ to move around the name display
area (5 characters) and the keys pπ to select
the characters.When the name has been
entered, use the key p to exit.The name is
stored.
Note: on installation, the programs are named
automatically when an identification signal is sent.
To quit the menus, press the i key.
§
for each programme to