Setup/Installation Menu Layout; Navigatingthe Menusystem - Toshiba 40G300U Owner's Manual

Setup/Installation menu layout
The Installation menu contains the Terrestrial and System Status menus.
MENU
To open the
Installation
menu (illustrated below), press © on the remote control or TV control panel, open the
Setup
menu, select
Installation,
a nd press @.
Terrestrial
[nput Configuration + [Opens the [nput Configuration menu]
Channel Program + [Start] + [Scans for new channels on ANT/CABLE]
Channel Options + [Opens the Skip / Lock Channel menu]
Channel Tuning Mode + Standard / Auto / Digital
Eastern / Newfoundland / Atlantic / Hawaii / Alaska /
Time Zone
Pacific / Mountain / Central
Signal Meter + [Opens the Signal Meter menu]
SystemStatus
Navigatingthe menusystem
You can use the buttons on the remote control or TV
control panel to access and navigate your TV's on-
screen menu system.
MENU
,, Press O to open the menu system.
Note:
The menu background may sometimes appear
black, depending on the signal the TV is
receiving. This is not a sign of malfunction.
When a menu is open, use the up/down/left/right
arrow buttons (,A. V .,q _) on the remote control
or TV control panel to move in the corresponding
direction in the menu.
Press @ to save your menu settings or select
a highlighted item. (A highlighted menu item
appears in a different color in the menu.)
All menus close automatically if you do not make
a selection within 60 seconds, except the signal
ineter menu, which closes automatically after
about 5 minutes.
EXIT
To close a menu instantly, Fess O •
29
40_46 55G300U EN-ASindb 29 2010/3/16 T@ 05:48:39