Using The Picture Still; Adjusting The Picture Position; Resetting The Picture Position; Selecting The Picture Mode - Toshiba 32WL68A Owner's Manual

Using the picture still

• Press R to freeze the picture.
Even if an image is frozen on the TV screen, the pictures are
running on the input source. Audio continues to be output as
well.
To return to a moving picture, press R again.
(M oving)
Notes:
• If you use this function except for the purpose of your private
viewing and listening, it may infringe the copyright protected
by the copyright laws.
• In the PC input mode (- page 20), this function is not
available.

Adjusting the picture position

Adjustment to the position of the picture may be made to suit
your viewing preferences.
1 Press M, then press Y or y to display the SET UP menu.
2
Press < or > to select Picture position.
Language
Auto tuning
Manual tuning
AV connection
Picture position
MENU Back EXIT
3
Press Q, then press < or > to select an item you want
to adjust.
Picture position
Horizontal position
Vertical position
Reset
MENU Back EXIT
4
Press Y or y to adjust the settings as required.
Horizontal position
Note:
When the picture format is in Wide or 4:3 mode, only the
Horizontal position can be adjusted.

Resetting the picture position

This function resets your picture position settings to the factory
settings.
1
From the Picture position menu, press < or > to
select Reset.
2 Press Q.
Using the TV's features
( St i l l )
SET UP
English
OK
OK
OK
OK
Watch TV
0
0
OK
Watch TV
0

Selecting the picture mode

You can select the picture quality instantly among three preset
modes and one user-set mode.
• Press N to select the desired picture quality.
Dynamic
Mode Picture quality
q Dynamic bright and dynamic picture
q Standard standard picture
q Mild soft picture
q Memory the picture quality you set
Note:
In the PC input mode (- page 20), this mode is not available.

Adjusting the basic picture quality

1 Press M, then press Y or y to display the PICTURE
menu.
PICTURE
Picture settings
Color management
Base color adjustment
Active Backlight Control
Cinema mode
meta brain PRO 100
MENU Back EXIT
2
Press < or > to select the Picture settings menu,
then press Q.
Picture settings
Back light
Contrast
Brightness
Color
Tint
Sharpness
MENU Back EXIT
3
Press < or > to select an item you want to adjust, then
press Y or y to adjust the settings as required.
Contrast
Selection
Y
Back light darker
Contrast lower
Brightness darker
Color paler
Tint reddish
Sharpness softer
Notes:
• The Tint may only be adjusted on a tape which has been
recorded and played back on an NTSC VCR.
• In the PC input mode (- page 20), Color, Tint and
Sharpness modes are not available.
OK
Off
On
On
On
Watch TV
1/2
100
100
50
50
0
0
Watch TV
100
Pressing y
lighter
higher
lighter
deeper
greenish
sharper
15