Turning Power On; Suspend Mode - Honeywell Belt Mount Sled Quick Start Manual

Turning Power On

To turn the terminal On, press and release the Power button

Suspend Mode

Press and release the Power button
Suspend Mode.
Because the display is hidden in the belt mount sled, observe the backlights
for the Send, Home, Back and End keys. When the Dolphin 70e Black is on,
these keys are backlit. If the keys are not backlit, the terminal is Off or in
Suspend mode.
Note: You should always place the terminal into Suspend mode before removing
the battery.
Pairing the Bluetooth Ring Scanner (Optional)
Prior to this step, the system administrator must have configured EZ Pairing.
Pair the Bluetooth Ring Scanner before placing the terminal in the sled.
1. Touch > Power Tools > EZ Pairing.
2. The EZ Pairing bar code is displayed on
the screen. If using a 2D imager ring
scanner, scan the on-screen bar code or
the bar code label on the back of the
terminal with the Bluetooth Ring Scanner.
If using a 1D ring scanner, scan the bar
code from the label on the back of the terminal.
3. Listen for the confirmation beeps.
4. Confirm the scanner is connected by observing the EZ Pairing icon on
the terminal display. When the icon is green, the scanner is connected .
If the icon is red, the scanner is not connected. Scan the bar code again.
to toggle the terminal in or out of
.