Adjusting The Picture; Selecting The Picture Mode; Adjusting The Picture Quality - Toshiba 26AV502U Owner's Manual

Adjusting the picture

Selecting the picture mode

You can select your desired picture settings from four different
modes, as described below.
Mode Picture Quality
Sports Bright and dynamic picture (factory setting)
Standard Standard picture settings (factory setting)
Lower contrast for darkened room (factory
Movie
setting)
Designed for viewing of PC tables and
PC
documents
Preference Your personal preferences
Note: PC mode is available for HDMI and PC inputs only
(grayed out for other input sources).
To select the picture mode using the menu system:
1
Press and open the Video menu.

Highlight Mode and press

Press or to select the picture mode you prefer and
p q
press .
Note: The picture mode you select affects the current
input only. You can select a different picture mode for
each input.
Chapter 6: Using the TV's features
.

Adjusting the picture quality

You can adjust the picture quality (Contrast, Backlight,
DynaLight™, Brightness, Color, Tint, and Sharpness) to your
personal preferences.
Selection Pressing
Contrast lower
Backlight* darker
DynaLight** On/Off
Brightness darker
Color paler
Tint reddish
Sharpness softer
Backlight
*
This feature adjusts the brightness of the entire screen. When in
video mode and no signal is input, this will automatically be set to 0.
(Settings are stored in memory.)
** D ynaLight
This function automatically strengthens the black coloring of dark
areas in the video according to the level of darkness.
To adjust the picture quality:
1
Press and open the Video menu.

Highlight Picture Settings and press

Press or to select the picture quality you want to
p q
adjust (Contrast, Backlight, DynaLight, Brightness, Color,
Tint, or Sharpness), and then press
setting, as described in the table above.

To save the new settings, highlight Done and press
You can use any of the picture modes ( "Selecting the
picture mode," above left) as a starting point for adjusting
the picture settings.
To revert back to the base mode that you began adjusting
the picture settings from, highlight Reset and press
The picture qualities you adjusted are automatically saved in
the Preference mode ( "Selecting the picture mode," above
left) until Reset is selected.
Pressing
t u
higher
lighter
On/Off
lighter
deeper
greenish
sharper
.
or to adjust the
t u
1
.
.