Lock (Parental Control); Operation - Toshiba SD-V592SU Owner's Manual

Before Operation - DVD Part (Continued)

LOCK (Parental Control)

LOCK
Rating
Password
Country Code
Rating
DVD
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain
parental control information that applies to the complete
disc or to certain scenes on the disc. Movies and
scenes are rated from 1 to 8, depending on the country.
DVD video discs may or may not respond to the
parental control setting if the Country code of the disc is
set wrongly. Some discs offer more suitable scenes as
an alternative.
The parental control feature allows you to block access
to scenes below the rating you input, thereby preventing
your children from being able to view material you
believe is unsuitable.
1. Select "Rating" on the LOCK menu then
press B.
2. To access the Rating, Password and Country Code
features, you must input the 4-digit security code you
created. If you have not yet entered a security code
you are prompted to do so.
Input a 4-digit code and press ENTER. Enter it again
and press ENTER to verify. If you make a mistake
before pressing ENTER, press CLEAR.
3. Select a rating from 1 to 8 using the v / V buttons.
Rating 1-8: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Note:
If you set a rating for the player, all disc scenes with the
same rating or lower are played. Higher rated scenes are
not played unless an alternate scene is available on the
disc. The alternative must have the same rating or a lower
one. If no suitable alternative is found, playback stops. You
must enter the 4-digit password or change the rating level
in order to play the disc.
22
Unlock
New
GB
Move Select
4. Press ENTER to confirm your rating selection, then
press SETUP to exit the menu.
5. Press OPEN/CLOSE (0) to activate parental
control.
Password (Security Code)
You can enter or change password.
1. Select "Password" on the LOCK menu then press B.
2. Press ENTER.
3. Follow step 2 as shown left (Rating). "Change" or
"New" is highlighted.
4. Enter the new 4-digit code, then press ENTER. Input
it again to verify.
5. Press SETUP to exit the menu.
If you forget your Security Code
If you forget your security code you can clear it using
the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number "210499" and the security
code is cleared.
3. Enter a new code as described above.
Country Code
DVD
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the list
in the reference chapter (see p. 45).
1. Select "Country Code" on the LOCK menu then
press B.
2. Follow step 2 as shown left (Rating).
3. Select the first character using v / V buttons.
4. Press ENTER and select the second character
using v / V buttons.
5. Press ENTER to confirm your country code selec-
tion.