Advertisement
Before attempting to repair or upgrade a recorder, it is advisable to clear a sufficient work space so components such as
the front panel can be rested on the work surface without getting scratched or damaged.
Panel Mounting
Before a new Touch Screen assembly can be fitted the recorder must be removed from the panel. Loosen the mounting
clamp screws, slide the clamp towards the rear of the recorder and remove the clamps and the recorder.
Removing the Case and Rear Panel
To fit a new Touch Screen assembly the case and back panel must be removed. The case and back panel can be
removed as a single assembly. Remove the 2 screws on each side of the case as shown in Fig 1 below
Slide the case and rear panel assembly off the recorder.
43-TV-33-88 iss.2 GLO Nov 06 UK
Fig 1
Remove 2 screws from
each side of the case
2
Advertisement
