Makita UC120D Instruction Manual page 10

1
2
1. Screw
2. Sprocket guard
2
1. Hex socket head bolt
2. Hex wrench
3. Guide bar
1. Guide bar
2. Cutter
2
1
1. Sprocket
2. Saw chain tension adjusting
spring
3. Concave portion of guide bar
10
• In order to prevent kickback, do not remove the bar tip or
replace the guide bar with one without a bar tip.
Loosen the screws with a screwdriver. Remove the sprocket
001732
guard.
Loosen the hex socket head bolt with the hex wrench pro-
001733
vided. Remove the guide bar.
1
3
Fit the saw chain over the guide bar. Notice that the cutters
001734
2
must be facing the revolving (arrow) direction.
1
Fit the saw chain over the sprocket. Install the guide bar so
001735
that its concave portion will contact the saw chain tension
adjusting spring.
3
Tighten the bolt to secure the guide bar. Install the sprocket
guard and tighten the screws to secure it.