System Log Config - Panasonic GA-AS12TPoE+ Series Instruction Manual

5.3.5.a.

System Log Config

Select "System Tools" and "System Log" and then "System Log Config" in the "Sys-
tem Log" screen to open the screen shown in Figure 5-33. On this screen, you can
configure enable/disable of the system log for each event.
Screen Description
Link UP/DOWN Displays "Enable"/"Disable" of saving the system log when the link status changes.
Enable
Disable
PoE ON/OFF Displays "Enable"/"Disable" of saving the system log when the PoE power supply
status changes.
Enable
Disable
Storm Control Displays "Enable"/"Disable" of saving the system log when storm control turns on.
Enable
Disable
Configuration Save the changes to the settings.
Figure 5-33 System Log Settings
Saves the system log when link goes up/down.
Does not save the system log when link goes up/down.
Saves the system log when PoE power supply turns ON/OFF.
Does not save the system log when PoE power supply turns
ON/OFF.
Saves the system log when storm control turns on.
Does not save the system log when storm control turns on.
67