Setting The Leak Detection Threshold - Toro 24 User Manual

Setting the Leak Detection Threshold

Note: Flow is monitored during non-irrigation periods (outside of scheduled
irrigation or during soak periods) to detect leaks. If flow is monitored above
the Leak Detect threshold, the master valve will be shut off and an alert
will be posted. The alert condition must be cleared to resume operation.
1. Turn the Upper Line knob (right) to select Leak Detect Threshold.
LEAK DETECT THRESHOLD
015 GPM
2. The default threshold will be displayed. To adjust, turn the Lower
Line knob. The value is adjustable from Off –30 in one-GPM
increments, or 30–995 in five-GPM increments.
3. Turn the Upper Line knob (right) to select Leak Detect Delay.
LEAK DETECT
015 GPM
Turn the Lower Line knob to adjust the delay period (1–6 minutes).
4.
Note: If Manual Irrigation or Quick Couplers are used, the Leak Detect should
be set above the expected flow for these operations.
52
3 Minutes
DELAY
3 Minutes